Field handling arm, rough terrain forklift

Modern warfare, "logistics first war" characteristic is obvious day by day, material consumption surge, material supply speed, rough terrain forklift of material quickly send and receive especially in the field of spare parts handling requirements higher. The birth of cross country forklift, effectively meet the requirements of the fast
loading and unloading operation of the field spare parts.

Off-road forklift is the main tool of material handling under field conditions and in 1957, the French Manny through group gave birth to the world's first car off-road forklift, Gulf War, off road forklifts the U.S. military to use the more than 900 Taiwan various forms of off-road forklift, handling the about 10.5 million tons of logistics.

YTO Peer with a variety of new forklift exhibitors again Chicago Logistics Exhibition

March 23-26, 2015, a two-year term of the United States Chicago Logistics Exhibition (ProMat 2015) in the United States Chicago McCormick Exhibition Center held a grand, the current exhibition is from America and the world famous material handling, 10 tons diesel forklifts ,supply chain and logistics solution scheme exhibition activities. Attracted the active participation of industrial vehicles manufacturing enterprises in China. Cosme forklift to its beautiful appearance design and fully comparable to the level of high-quality products, certainly in the international market, to participate in the international market sales since a success.

This ProMat 2015 show again to bring a number of different types of representatives of the new exhibitors, battery operated forklift ,won more foreign eyeballs.

Research on the application of high speed cross country forklift truck

High-speed off road forklift is special forklift having both high speed and cross-country performance, off road forklift trucks applicable to field operations of large range, long distance, and can follow the transport team to advance at a high speed. Through the comparison of the forklift several basic transmission modes, that closed hydrostatic driving the superiority, and the design of the high-speed off road forklift closed hydrostatic drive system; according to the common problems of high-speed hydrostatic drive proposed corresponding solutions, china forklift and its main technical parameters of a Research Institute of the latest research and development of high-speed off road forklift as the basis, matching calculation of hydraulic transmission system and its conclusions to the design of forklift hydrostatic drive system has a certain reference value.

Enter and garrison of China rough terrain forklift in Hanshan County

In the first quarter of this year, Hanshan County in charge carrier units and responsible person actively carry out point of investment activities, china forklift ,some major investment projects made great progress.

That subordinate, Putuo District, Shanghai City, Taopu area has hundreds of large, medium and small enterprises in urgent need of relocation, lpg forklifts ,Hanshan county is mainly responsible for the person to lead the undertaking of the carrier unit
repeatedly door docking, and ultimately the Putuo District government will officially classified in Hanshan county to undertake Taopu area enterprises transfer of the six counties of one.

With a total investment of 580 million yuan of Huasheng railway logistics land project in Hong Kong have investment intentions, Hanshan county is responsible for leading undertake copper gate town person in charge to Fujian home docking, the progress has been made in the project, investment has organized specialized personnel of copper gate town project sites in the survey, is in the preparation of project feasibility study report, four wheel rough terrain forklift trucks , in Beijing, Beijing, Tianjin and China Merchants Bureau of investment Dongli electronic commerce project is going to start. At the same time, some carrier unit also unremittingly strengthen to track the Shengzhou Yitian electric kitchen, elegant birds shoes, Toshiba electronics project, urged the early contract settled.

Interview, Hanshan county is mainly responsible for people think, have a county game to recruit big business, recruit good business, only the resources sharing, rational and orderly, county town of carrier linkage, in order to form a more dynamic and competitive business environment, to form a powerful force to attract foreign investment.

China rough terrain forklift for investment in Hanshan County

Depending on the location, resources, conditions and development orientation of the county vehicle units in this year's march in Hanshan investment activities, the county's proposed implementation of bundled investment in the town and the park work. Investment process, China rough terrain forklift some towns initiative to strengthen investment cooperation and economic zone, and actively carry out the bundled type of investment, the joint introduction of major investment projects.

In addition to the town from Huang Chia zhaoguan forklift recommend this major project to praise Zen Mountain Economic Zone, according to the county's industrial pottery factory town initiative to contact a good layout Shanghai Auto Parts Industrial Park project recommended to Hanshan. With a clear mandate decomposition into policies such as taxation, some of the town through the enclave economy, bundling investment, four wheel rough terrain forklifts cracked bottleneck restricting investment in land, carriers, etc., bid farewell to the village ignition, household smoke  fragmentation of the investment model. The county a game of chess is also reflected in the targeted investment.

New investment mechanisms of China rough terrain forklift

Merchants are not the same as in the past is now extensive, off road rough terrain forklift ， fragmentation, fragmentation of the town (district park) dispersed in Hanshan investment model has been eliminated.

Hanshan adapt to the new normal investment, innovation and new mechanisms for investment, through the power of integration, resource sharing, bonuses and sharing initiatives to achieve the county's investment, "a game of chess," the formation of efficient operation, four wheel rough terrain forklifts ， model innovation, professional services of the new investment system, receive remarkable results.

2014, the county the city's leading investment work, the first quarter of this year, the county's number of new industrial projects started, completed several industrial projects, rough terrain forklift manufacturers ， new construction of industrial projects, such as investment in fixed assets three main indicators are ranked in the forefront of the city carrier unit.

The new super-terrain forklift

Britain has recently introduced a new off-road truck. Standard truck specifically for construction, agriculture, forestry, construction and equipment rental business is designed to work in rugged terrain, off road forklifts , and is based on the largest series A forklift streamlined design.

There are two sizes of models, load range from 2.5-5.0t, for two drive and 4-wheel drive configuration. From April 2015, 2.5-3.5t truck is equipped with a Yanmar water-cooled diesel engine, rough terrain forklift trucks while the truck is equipped with Perkins 4-5t 864 Euro 4 engine.

Four-wheel drive will also be enabled from April 2015, and to benefit from 2WD units have the same power. Focus on safety, performance, operator comfort, reliability and maintainability, is one of a new generation of maximum RTFL forklift. It can be executed in a complex terrain operations such as loading, which ye red, handling and processing of different ways, and also comes with a shovel, traction, china forklift ,lifting and other tasks.

China rough terrain forklift industry overview

China forklift industry market prospects and financing strategy consulting report analyzes the market size of the forklift, forklift, forklift（rough terrain forklift manufacturers ） products supply and demand situation of competition and the main business of forklift, forklift company market share, and make a scientific prediction on the future development of cross-country truck.

The first chapter gives an overview of forklift industry, four wheel rough terrain forklifts ，including summary of properties and uses of China forklift industry products. Secondly, the Chinese forklift industry business model analyzed with the mode of production, procurement and sales model.

YTO battery powered forklift power appliance industry

From the last century since the late 70's, developed in line China appliance industry from abroad, after 30 years of rapid development,battery powered forklifts has achieved significant position among the same industry in the world.

At present, Chinese appliance industry has established a relatively complete system of production, from the initial introduction and purchase, the direct introduction of the production line to the formation of Haier now, Gree, beauty, such as a large number of Hisense, Changhong has the ability of independent development Chinese national home appliance enterprise, the product has nearly 80% share in the domestic market, the export foreign exchange earning ability strengthens constantly,  Electric forklift trucks ,fully demonstrated the strength of China's household electrical appliance enterprises.

YTO electric forklift  ( 2 ton electric forklift  )to provide integrated material handling solution strength, for customers to achieve Smooth Flow of Goods  ideal.The industry is committed to creating customer material handling solutions leading supplier.

Three technical maintenance

                                        Three technical maintenance       

 
   1, cleaning the tank, filters and piping, and check for corrosion, cracking collision case, shall not be used after washing with a fiber yarn, cloth wipe. 2, cleaning torque converter, transmission, inspect parts for wear, replace with new oil. 3, check the drive shaft bearing, depending on the need to exchange universal joint cross-axis direction. 4. Check the drive axle fastening ministries and whether leakage, and clear pores. Dismantling the main gear, differential, wheel reducer, adjust the bearing axial clearance, add or replace oil. 5, dismantling, adjustment and lubrication of the front and rear wheels, axle were transposed. 6, cleaning brakes, adjust the clearance between the brake drum and brake shoe lining between. 7, cleaning liberal amount of rotation steering, check the steering wheel. 8, disassembly and cleaning gear pumps, pay attention to check the wear of the gear housing and bearing. 9, demolition multi-way valve, the stem and the valve clearance check, do not open the safety valve, if not necessary. 10, check for damage and cracks knuckles, steering axle kingpin with the situation with the knuckle, dismantling the vertical and horizontal rod and steering arm joints wear. 11, removing a tire on the rim rust paint, check the tires and tubes and flaps, transposition accordance with the provisions inflated. 12. Check the connections are tight hand brake parts, adjusting the hand brake lever and foot brake pedal stroke work. 13. Check the battery electro-hydraulic proportion, as inconsistent with the requirements, the charge must be removed. 14, clean water tank and oil cooler. 15, check the shelves, frame without deformation, washable wheel, each accessory is reliable fixed, restocking weld if necessary. 16, dismantling the lifting cylinders, tilt cylinders and steering cylinder, replace worn seals. 17, check the instrument sensors, fuses and various switches, make adjustments if necessary. Fourth, the whole car or truck lubrication new truck stops working after a long time, within two weeks at the start of use, should be lubricated bearings for when lubrication, Chen should take advantage of new oil will all the oil out, and lubricate twice above, and should pay attention to the following points: 1, should be removed before lubricating oil cap, oil drain plug and nozzle above the dirt, dirt to avoid falling into the house. 2, with the grease gun lubricant injection pressure, injection pressure to be part of the components of the combination of the extrusion lubricant so far. 3, should be replaced in the summer or winter seasonal lubricant (oil, etc.). 5 tons diesel forklifts

Forklift safe driving requirements for personnel

                forklift spare parts safe driving requirements for personnel

 

(Five) working 1. Fork upload articles shall be adjusted two forks spacing, so that the two forks load balancing, not skewed, items should be abutting side rack gear. 2. Prohibition of single fork job or top with a fork thing, pull things. Special circumstances pull things must establish safety warning signs to remind pedestrians around. 3. items during loading and unloading process, you must brake the truck with the brake. The speed should be slow and steady, do not pay attention to the wheels rolling skids items, in order to avoid rolling objects Bengqi wounding. 5. When goods cross on goods, forks should be as deep as possible into the fork under load, but also pay attention to the fork or sharp objects can not touch other goods. After the minimum should be to stabilize the mast tilting load after load so as not to slide backwards. When lowering the load allows a small amount of mast forward, in order to place the load and extract forks. 6. prohibit speed fork and take the goods to hard objects colliding head with a fork. 7. diesel forklift operation thereof is prohibited personnel standing around the fork to avoid collapse of the goods wounding. 8. prohibit overloading, prohibit the use of fork lift personnel engaged in high places, in order to avoid an accident by falling. 9. allowed inertia brake slip, drop, round or easy to scroll items. 10. Not allowed to use the fork to pick, turn, unloading pallets methods.
(Six) 1. Never leave the truck when the truck left dangling items on the fork, leave the goods must be removed or lowered before the fork truck frame. 2. Pull the parking brake handle dead or depressed handbrake switch. 3. The engine stalled, power outages. (Except in special circumstances, such as the driver's line of sight is not out of the vehicle and no more than 1 minute). 4. Remove the key. Before (seven) Note 1. Stop the engine stalled, the engine should be idling 2. 2-3 minutes after flameout. After stopping the engine flameout, should tighten the brake handle. 3. low season (below zero), the cooling water should be exhausted, or join antifreeze. 4. When the temperature is below -15 degrees, the battery should be removed and moved indoors to avoid cracking. 1-2 turn the handle to rotate the oil filter, check the bolts, nuts without loose phenomenon, and timely exclude normal. 5. truck wash wipe clean routine after routine maintenance, parking garage or designated locations.
(Viii) the accident as an accident, you should do: 1. tight volts to operate the steering wheel or handle, and grasp the steering wheel or the operating handle. 2. dump truck body against the opposite direction. 3. Note the head or chest to prevent injury, do not bump the truck overturned.

Two technical maintenance truck

                                       Two technical maintenance 2.5 tons off-road forklifts

 
  1, check the cylinder pressure or vacuum. 2. Check and adjust valve clearance. 3, check the thermostat is working properly. 4. Check the multi-valve, lift cylinders, tilt cylinders, steering gear if the fuel tank and pump is working properly. 5. Check the transmission's shift work properly. 6. Check and adjust the hand, foot brake, brake pads and brake drum clearance. 7, the replacement of the oil sump, check the crankcase ventilation takeover is intact, clean oil filter and fuel filter element. 8. Check the generator and starter motor is firmly installed, and lugs are clean firm, check brushes and commutator for wear. 9. Check the fan belt tightness. 10. Check the wheel is firmly installed, meets the requirement if the tire pressure, and clear debris embedded in the tread. 11, due to maintenance work and dismantled parts, when re-assembled to conduct the truck road test. (1) braking performance under varying degrees, there should be no deviation, hunting. On the steep slopes, after the hand brake tension, can reliably stop. (2) to listen to the engine under acceleration, deceleration, reload or load operation, etc., there is no unusual sounds. (3) road test some mileage, check brakes, transmission, front axle, gear pumps at the presence of overheating. (4) Fork lifting speed is normal, with or without shaking. 12, check the diesel tank of fuel filter has blocked imports of damage, and clean or replace the filter. 8 tons diesel forklift

Forklift safe driving requirements for personnel

                              Forklift safe driving requirements for personnel

 
  (A) staff 1. Drive the 1.5 tons off road forklift must go through professional training, through the assessment of production safety supervision department, obtain special operating permit, and after the company agreed to before being driving, operating without a license is prohibited. 2. Do not drink and drive, driving not smoking, eating, chatting, playing phone and talk walkie-talkie.
Before and after (b) Inspect the vehicle 1. forklift operation, you should check the appearance, fueling, lubricating oil and cooling water. 2. Check the starter, running and braking safety performance. 3. Check the lights, horn signal is complete and effective. 4. forklift operation process should check the pressure and temperature are normal. 5. After running the truck also checks for leaks and replace seals.
(C) Upon initial start 1. ago, look around, make sure no obstacles impede traffic safety, first whistle, after the start. 2. Hydraulic (pneumatic) brake the vehicle, the brake hydraulic pressure (atmospheric pressure) form must reach safety before they start. 3. start loading the truck, the driver should make sure smooth and reliable cargo. The start must start slowly and steadily.
(D) with 1 speed, distance to the bottom of the fork height should keep 300 ~ 400mm, door frame to be backward. The fork should not rise too high 2. traveling. Or driving on the way out of the job site, pay attention to whether the obstacle blocking material over the scratching. When traveling loading forks are not allowed to rise too high, affecting the stability of the truck. 3. After discharge should drop the fork to the normal driving position before driving. 4. When cornering, such as pedestrians or vehicles, should be issued with a signal nearby. Ban high-speed sharp turns, high-speed U-turn will lead to the loss of the lateral stability of the vehicle tipping. 5. driving the truck when coasting downhill prohibited flameout, non-special circumstances prohibit loading driving brakes. 6. truck factory at runtime to comply with traffic regulations, must be kept at a safe distance from the vehicle in front. 7. diesel engine parts operation, the load must be without prejudice to the minimum travel position, the door frame to the appropriate backward. Except when stacking or loading shall not increase the load. 8. The loading height must not block the driver's line of sight. When special circumstances before items affecting sight lines, reversing 9. To prohibit turning at low speed on the ramp, across the ramp should not be driving. 5 km 10 truck plant safe driving speed / hour into the workshop area must be safe driving at low speed. 11. forklift or crane lifting travel is prohibited personnel standing on the forks grip the article and balancing role. 12. identify problems and timely maintenance and reporting, never sick a job and it hidden.

For rough terrain forklift truck maintenance work reliably, the potential ability to play a forklift, to have regular maintenance measures.

 
Technical maintenance measures generally: 1, daily maintenance, class after work. 2, the level of technical maintenance, accumulated 100 hours of work, a group working system is equivalent to two weeks. 3, two technical maintenance, accumulated 500 hours, the equivalent of a quarter of a group working system. First, a routine maintenance, cleaning the truck dirt, mud and dirt Egypt, key positions are: fork frame and door frame slide, generator and starter, battery electrodes fork columns, tanks, air filter. 2, check all parts of fastening, focusing on: Fork supporting, lifting chain tensioning screw, wheel bolts, wheel fixed pin, brakes, steering screws. 3, check the steering of reliability, flexibility. 4. Check for leaks, focusing on: all fittings, diesel tank, sump, pump the brake, lift cylinders, tilt cylinders, tanks, pumps, engine oil pan, torque converter, transmission, drive axle, the main reduction , hydraulic steering, steering cylinder. 5. Check the tire pressure: less than the specified value should be added to confirm that no leak. Check the tire tread and side without damage, the rim is deformed. 6, brake fluid, water check: Check the brake fluid is within the range of the scale, and check whether mixed with air in the brake lines. When you add brake fluid to prevent dust, water mixed. When water is added to the tank, on the use of clean water, the use of antifreeze, should bear the same antifreeze. When the water temperature is higher than 70 ℃, do not open the radiator cap when you open the lid, a thin pad of cloth, do not wear gloves tighten radiator cap. 7, engine oil, hydraulic oil, electrolyte tests: first pull out the dipstick, wipe feet after insertion and then pull out the head to check the oil level is between the two tick marks. The working oil tank should be between two ticks; too little oil, the pipeline will be mixed with the air, too much will overflow from the cover. Battery electrolyte also want to tick down in between, add distilled water shortage will have top line. 8, the brake pedal, the inching pedal, clutch pedal, hand brake check: Each pedal is depressed, check for abnormal slow or jammed. Force the hand brake lever should be less than 300N, confirm the hand brake is safe and reliable. 9, belts, horn, lights, instruments and other checks: Check the tightness of the belt meets the requirements, there is no margin adjustment cracked or damaged, replace; horn, lights, instruments should be properly effective. 10, put to the oil filter sediment. 1.5 tons four wheel rough terrain forklift trucks

Consider buying forklift

                                                Consider buying forklift

 

1. rough terrain forklift for sale operating environment which is the primary purchase considerations, outdoor or indoor operation. If forklifts for warehouse outside, to choose gas, liquid petroleum or diesel powered internal combustion lift trucks; if the truck is mainly working in the outdoor cold environment, then gasoline-powered forklift is the most reasonable choice. It is worth noting, diesel forklifts should be kept in use, turn off the engine can not always; if the user initiates a truck every few minutes, it will damage the truck; another suggestion, diesel truck engine oil should be changed regularly. Another type of truck is mainly designed for outdoor operation, the liquid petroleum - also known as LP-driven, fuel and gasoline forklift for the market. LP forklift suitable for both indoor and suitable for outdoor use, because it is smaller than gasoline exhaust toxicity. LP fuel costs and diesel forklift truck is almost the same, but less diesel forklift maintenance costs. In cold conditions, the user sometimes LP forklift assembly protective cover or heater; if this does not guarantee the normal operation of the truck, then the LP into gasoline forklift truck is also very easy. Outdoor environment not only determines the selection of the internal combustion engine, of the type of tire used is also required. The pneumatic tire suitable for rough terrain; free inflatable tires are suitable for outdoor flat and hard ground, and most indoor applications.
2. For indoor indoor warehouse forklift handling, such as in warehouses, electric forklifts advantage. Compared with the internal combustion forklifts, its main advantage is low noise, no pollution. Although the price is higher than the electric forklift internal combustion forklifts, but the running costs low. The main reason is to save money without electric forklift fuel, there is no need to replace oil and classes of components such as plug and socket. Electric forklift maintenance costs for the normal life cycle, the hour only 2 yuan to 6 yuan (a forklift running one shift a day, about the use of 1700h per year). Must always pay attention to the use of electric forklift battery, check the water level and avoid battery kill.
3. Select the type battery forklift trucks truck to select the most important factor is to consider the application and the actual situation in the warehouse, if the truck for loading and unloading trailers, that front-wheel drive, driving seat type forklift trucks more appropriate. If the shuttle truck for loading and unloading cargo to the trailer, a factor to consider is "free lift" problem, that is, under the premise of not elevated mast, fork can be raised. Warehouse roadway width is another issue to consider when choosing the truck, three car truck requires 10ft (1ft = 0.304? 8m) wide roadway, four-wheel trucks require more space for 12 ~ 13ft wide roadway. In a more narrow roadway, users prefer Reach truck, which is equipped with a tray back outriggers can be operated at about 8ft wide roadway.
  4. The capacity factors must be considered when the truck purchase. Proposed purchase of a larger capacity than usual forklift required. If you want to lift the forklift pallet load is 900KG, then choose 1300KG capacity forklift appropriate. When handling flammable or hazardous materials purchased forklift, users must check their level of security. If the truck is marked with E logo, sparking phenomenon may occur; if the truck is marked with EE logo, is equipped with many safety devices; the safest level is EX, said the truck did not cause ignition of such metal parts. In short, more secure than diesel forklift trucks EX level, specifically designed for safe diesel forklift marked with DX logo.
5. Price PK efficient price is only one factor, as important as the ability to price and vehicle spare parts and maintenance services itself. Recommends that users consider the truck "life" of the total cost, not just the purchase price. Most experts are against buying used forklifts, unless it is used to do the work of the auxiliary equipment supplies. If you only need a forklift, you can buy used forklifts, but be sure to confirm the quality standards, so users should consider the efficiency of the truck, the manufacturer's support as well as the future needs of a variety of truck number. For savvy users, long-term and short-term interests should be taken into account.

Note the use of diesel forklift

                                         Note the use of diesel forklift 

 

First, a daily maintenance, checking the oil sump oil within the oil gauge is between two engraved lines, close to the vicinity of engraved lines. The new machine or disable longer diesel oil supremacy after filling engraved lines, low speed for 5 to 10 minutes after the stop, re-use dipstick to measure the oil level. 2. Check the water tank. 3. Check the fuel pump oil within the oil, should be less than complementary to a predetermined position. 4, eliminate three leakage (oil, water, gas) phenomenon. 5, check the parts, accessories, device ruggedness. 6, check the cleanliness, oil, dust, with special attention to dry clean electrical equipment. 7, the new machine after 50 hours of light load operation, the oil should be changed (including the injection pump oil) and oil filter cartridge, clean and oil sump strainer. 8, daily lubricant additives timely protection. Second, the engine Caution 1, the new machine or overhaul, engine can not start with full capacity, high speed, low speed light load must be 50 hours after the run before into normal operation. 2, to ensure clean fuel. If necessary, filter through precipitation or silk. 3, to maintain a normal temperature (70 ~ 85 ℃), oil pressure (at medium speed 0.2 ~ 0.4MPa). 4, during operation, abnormal, immediately stopped and checked. 5, should not use "hard water" for cooling water, prevent scale, reduce engine life. off road rough terrain forklift

Warehouse forklift categories

Warehouse 5 tons rough terrain forklift trucks categories

 
Electric picker: In certain conditions (such as supermarket distribution centers), does not require a whole pallet shipments, but in accordance with the order picking up a variety of species of cargo pallets, this link is called picking. Chosen according to the height of the goods, electric order pickers pickers can be divided into low (2.5M inside) and the high order pickers (up to 10 m). Carrying capacity of 2.0 to 2.5 tons (low), 1.0 to 1.2 tons (in high, with cab upgrade).
  Low driving three Pallet Stacker: usually equipped with a three-stacking head, do not need to turn the truck, fork rotation can be achieved and pick up the goods stacked on both sides of the channel width of 1.5 to 2.0 m, lifting height of up to 12 m. Truck cab can not always upgrade on the ground, taking into account the limitations of the operative field, mainly for lifting height of less than 6 meters.
Three high stacking off road rough terrain forklift driver: with low driving similar three-stacking forklift, driving three high stacking forklift is also equipped with a height of up to 14.5 meters three stacking head, the channel width of 1.5 to 2.0 meters, upgrade. Its cab can be improved, the driver can clearly observe any height goods can also be picking operations. Three high stacking forklift driver in a variety of performance and efficiency are better than the low three-stacking forklift driver, so the car has been gradually replace the low three-stacking forklift driver.