Forklift works

When lifting the load, energy consumption began, when the goods with the High Mast Diesel Forklift down energy to recycling, field tests show that the total energy consumption of 19% load consumption boost.
BT's Reflex Aci series priority regenerative driving portion, because this is the largest part of the energy consumption significantly, and without increasing the complexity of the system, i.e., without any increase in cost can be achieved. Due to its high braking torque, almost all of the braking mode and generating energy are born.
On some trucks also have a DC electric power regenerative braking, but must occur when a strong braking, which means that part of the energy regeneration in the brake lining part is converted into heat. And almost all of the condition, Reflex
Aci will generate renewable energy, and continuing role in the truck until completely still.
How much energy can be recovered in fact can not be calculated, which depending on the use condition, when the brake start speed, a more reasonable number is 10% -15%, i.e. the overall energy consumption of the truck 5% -7 %.
Improve performance
If you can not be reasonably recovered energy use, the benefits are limited. The easiest approach is to be able to recharge the battery to extend the use of time-oriented. In ReflexAci in, BT this part of the energy is used to improve the overall performance of the truck. As a result, the maximum speed is increased by 10% more visible role is reflected in the acceleration.
Reflex Aci reach top speed is only 15m, and dc truck needs at least more than twice its distance. Studies have shown that, in most practical use, since the launch of a Diesel Rough Terrain Forklift Truck handling operations to stop the few people in the distance 20m. Only BT exchanges forklift makes excellent acceleration in such a short distance to achieve full speed as possible.
In summary, the exchange of technology in the truck, making the overall improvement of the performance of the Wheel Driving Diesel Forklift, fault and event replacement rate was significantly reduced, reliability is greatly enhanced. In the client that reflects higher productivity per unit time, lower operating and maintenance costs. Exchange of technology in the future forklift battery technology is called, will get more and more widely used.

Forklift steering system

 
    Balance forklifts are used rear-wheel steering, and a small operating range, steering movements frequently. If mechanical steering, the driver's work intensity will be high. If the hydraulic power steering, will greatly reduce the labor intensity. Therefore, the forklift on the market now is basically realized the power steering. Domestic battery forklift hydraulic steering is generally steering motor kept running at full capacity in all terrain forklifts operation, thus causing unnecessary waste of energy, as well as electrical and hydraulic reduce wear. However, LINDE and NISSAN companies such as battery forklift, the power steering goes further, through the steering wheel does not move, then turn the motor does not work. This feature not only saves energy, but also extend the charge again after working hours can shorten the steering motor idling time, and therefore reduce the motor and pump wear.
    Japan's Komatsu Forklift battery power steering EPS speed sensor. The system is a "load sensing type" steering, brake and power with a servo-hydraulic steering type priority dispensing valve. Power steering system to enhance the power of the motor can automatically select the best power steering required

electric forklift trucks selecting some truly powerful and reliable parts suppliers as a strategic partner

and together with them to improve product quality, production issued by the influential electric forklift brands. In the specific procurement and evaluation, there are some principled things. For example, battery powered forklift supplier whether the relevant qualifications, whether the supplier's environmental performance standards of rubber and plastic parts,

All Terrain Forklift

as well as whether the special conditions under high pressure and temperature aging can achieve the required degree of national standard. In the choice of battery, battery manufacturers pay attention to review whether the relevant certificates and battery scrap approach is consistent with the quality and grade requirements, etc. According to the data, 5 tons off-road forklift trucks the current transport in the logistics industry, consuming too many social resources and costs, to solve this problem, put the cost to a minimum, especially electric forklift truck is a key factor. energy conservation and environmental protection as the future of social subjects, must lead to forklift manufacturers solemn note, innovative technology and energy-saving and environmental protection must improve truck efficiency. All in all, electric forklift manufacturing companies, small parts can not ignore the subtle aspects of the link, each component has its own irreplaceable key role only if we start from the details, attention to detail improvement and innovation, in order from the whole reached enhance governance, creating a superior brand of electric forklifts, ahead of the competition.

electric forklift trucks in the purchase should pay attention to what matters

The so-called electric forklifts is electrically powered handling equipment, the most critical component is the battery, Rough terrain forklift there are many other components. Today, rising electric forklift range of applications, the majority of users. However, for a line lay terms, buy a good electric forklift is not an easy task. Today,5 tons off-road forklift trucks the market there are many brands of electric forklifts, some foreign brands to enter the domestic market, in numerous buildings of electric forklift brands, users should be how to choose? How can I buy a really trusted, cost-effective products? Here Xiaobian introduce electric forklift purchase points.
First of all, pay attention to the brand. Brand is synonymous with strength, brand manufacturers through strength after years of hard work and accumulation accumulation and display. Under the price gap is not the case, we should try to choose big brands, big brands relatively more secure, both in terms of product quality and after-sales service.

YTO forklift check and adjust V-belt tightness

 check the battery electrolyte level, density and load voltage, check the engine oil, gear oil, hydraulic oil,5 tons off-road forklift trucks coolant fluid levels, check the instruments, lighting, signal , switch button and vehicle accessory equipment operating conditions, check the hydraulic system distribution valve lever travel and work tank trip, check and adjust the tightness of lifting chain, check the door frame,electric forklift truck fork work. Prime mover is the engine of internal combustion forklifts, high engine speed, low torque, and can not be reversed. The forklift when the job requires a lower speed, and to constantly changing direction of travel, wheels also have a large torque, for between the prime mover and a drive wheel, a set of prime mover can reduce speed and increase torque and steering means for converting the drive wheels, called the transmission. Internal combustion forklifts transmission mode is generally divided into three kinds, namely, mechanical, hydraulic and hydrostatic type.