Forklift works

When lifting the load, energy consumption began, when the goods with the High Mast Diesel Forklift down energy to recycling, field tests show that the total energy consumption of 19% load consumption boost.
BT's Reflex Aci series priority regenerative driving portion, because this is the largest part of the energy consumption significantly, and without increasing the complexity of the system, i.e., without any increase in cost can be achieved. Due to its high braking torque, almost all of the braking mode and generating energy are born.
On some trucks also have a DC electric power regenerative braking, but must occur when a strong braking, which means that part of the energy regeneration in the brake lining part is converted into heat. And almost all of the condition, Reflex
Aci will generate renewable energy, and continuing role in the truck until completely still.
How much energy can be recovered in fact can not be calculated, which depending on the use condition, when the brake start speed, a more reasonable number is 10% -15%, i.e. the overall energy consumption of the truck 5% -7 %.
Improve performance
If you can not be reasonably recovered energy use, the benefits are limited. The easiest approach is to be able to recharge the battery to extend the use of time-oriented. In ReflexAci in, BT this part of the energy is used to improve the overall performance of the truck. As a result, the maximum speed is increased by 10% more visible role is reflected in the acceleration.
Reflex Aci reach top speed is only 15m, and dc truck needs at least more than twice its distance. Studies have shown that, in most practical use, since the launch of a Diesel Rough Terrain Forklift Truck handling operations to stop the few people in the distance 20m. Only BT exchanges forklift makes excellent acceleration in such a short distance to achieve full speed as possible.
In summary, the exchange of technology in the truck, making the overall improvement of the performance of the Wheel Driving Diesel Forklift, fault and event replacement rate was significantly reduced, reliability is greatly enhanced. In the client that reflects higher productivity per unit time, lower operating and maintenance costs. Exchange of technology in the future forklift battery technology is called, will get more and more widely used.