(A) staff 1. Drive the 1.5 tons off road forklift must go through professional training, through the assessment of production safety supervision department, obtain special operating permit, and after the company agreed to before being driving, operating without a license is prohibited. 2. Do not drink and drive, driving not smoking, eating, chatting, playing phone and talk walkie-talkie.
Before and after (b) Inspect the vehicle 1. forklift operation, you should check the appearance, fueling, lubricating oil and cooling water. 2. Check the starter, running and braking safety performance. 3. Check the lights, horn signal is complete and effective. 4. forklift operation process should check the pressure and temperature are normal. 5. After running the truck also checks for leaks and replace seals.
(C) Upon initial start 1. ago, look around, make sure no obstacles impede traffic safety, first whistle, after the start. 2. Hydraulic (pneumatic) brake the vehicle, the brake hydraulic pressure (atmospheric pressure) form must reach safety before they start. 3. start loading the truck, the driver should make sure smooth and reliable cargo. The start must start slowly and steadily.
(D) with 1 speed, distance to the bottom of the fork height should keep 300 ~ 400mm, door frame to be backward. The fork should not rise too high 2. traveling. Or driving on the way out of the job site, pay attention to whether the obstacle blocking material over the scratching. When traveling loading forks are not allowed to rise too high, affecting the stability of the truck. 3. After discharge should drop the fork to the normal driving position before driving. 4. When cornering, such as pedestrians or vehicles, should be issued with a signal nearby. Ban high-speed sharp turns, high-speed U-turn will lead to the loss of the lateral stability of the vehicle tipping. 5. driving the truck when coasting downhill prohibited flameout, non-special circumstances prohibit loading driving brakes. 6. truck factory at runtime to comply with traffic regulations, must be kept at a safe distance from the vehicle in front. 7. diesel engine parts operation, the load must be without prejudice to the minimum travel position, the door frame to the appropriate backward. Except when stacking or loading shall not increase the load. 8. The loading height must not block the driver's line of sight. When special circumstances before items affecting sight lines, reversing 9. To prohibit turning at low speed on the ramp, across the ramp should not be driving. 5 km 10 truck plant safe driving speed / hour into the workshop area must be safe driving at low speed. 11. forklift or crane lifting travel is prohibited personnel standing on the forks grip the article and balancing role. 12. identify problems and timely maintenance and reporting, never sick a job and it hidden.
没有评论:
发表评论