Forklift safety rules are as follows

                                        Forklift safety rules are as follows

 
One purpose: specification 1.5 tons rough terrain forklift trucks safety, safe driving;
Second, the scope: Truck driver;
Third, forklift driving safety rules: 1. You must go through the relevant departments of the examination, obtain special types of government agencies operating permits issued before driving the forklift, and strictly observe the following safety rules. 2. You must carefully study and strictly abide by the rules, familiar with the regional road vehicle performance and operating conditions. Forklift Maintenance Maintenance grasp the basic knowledge and skills required to do a serious vehicle maintenance work. 3. Do people traveling with, Do not drink and drive; forbid eating and chatting with the way; the way phone calls are not allowed to travel. 4. Before vehicles should be strictly checked prohibited with fault of the bus, not forced through dangerous or potentially dangerous road.
Fourth, forklift safety operating manual: electric forklift driver's operation must comply with the safety regulations of claim 1, before running to check the effectiveness of the braking system and battery power is not enough, if found defective in processing complete before running after the operation 2, when transporting goods allowed to operate with a single fork goods, but also not allowed to use the fork to stir up the tip of the goods, must be fully inserted in the fork of the following goods and cargo evenly on the fork 3, a smooth start, steering ago be sure to slow down, normal driving speed is not too fast, smooth parking brake 4, allowed to stand on the fork, forklift manned allowed five runs, for the larger size of the cargo to be handled with care, do not carry a fixed or loose cargo 6, regularly check the electrolyte, prohibit the use of fire lighting to check the battery electrolyte 7, not before stopping, to decline significantly and fork truck neatly, parking and disconnect the vehicle 8, the power is running low when, power protection devices automatically open forklift truck forks rise will refuse to operate, continue to prohibit cargo, in which case it should empty the truck drove charger to charge the position. 9, charging, disconnect the battery forklift working system and connection, and then connect the battery and charger, then connect the charger from the electrical outlet, turn on the charger. 10. Typically, intelligent charging machine without the need for manual intervention, non-smart charger, you can manually intervene charger output voltage and current values, usually voltage output value than the nominal voltage of the battery to 10% higher output current should rated capacity of the battery is set to about 1/10. (Eg DC24V / 210AH battery, charger output voltage and current can be set 26V, 21A) of the safety requirements of the truck