Note the use of diesel forklift
First, a daily maintenance, checking the oil sump oil within the oil gauge is between two engraved lines, close to the vicinity of engraved lines. The new machine or disable longer diesel oil supremacy after filling engraved lines, low speed for 5 to 10 minutes after the stop, re-use dipstick to measure the oil level. 2. Check the water tank. 3. Check the fuel pump oil within the oil, should be less than complementary to a predetermined position. 4, eliminate three leakage (oil, water, gas) phenomenon. 5, check the parts, accessories, device ruggedness. 6, check the cleanliness, oil, dust, with special attention to dry clean electrical equipment. 7, the new machine after 50 hours of light load operation, the oil should be changed (including the injection pump oil) and oil filter cartridge, clean and oil sump strainer. 8, daily lubricant additives timely protection. Second, the engine Caution 1, the new machine or overhaul, engine can not start with full capacity, high speed, low speed light load must be 50 hours after the run before into normal operation. 2, to ensure clean fuel. If necessary, filter through precipitation or silk. 3, to maintain a normal temperature (70 ~ 85 ℃), oil pressure (at medium speed 0.2 ~ 0.4MPa). 4, during operation, abnormal, immediately stopped and checked. 5, should not use "hard water" for cooling water, prevent scale, reduce engine life. off road rough terrain forklift
没有评论:
发表评论