Forklift safe driving requirements for personnel

                forklift spare parts safe driving requirements for personnel

 

(Five) working 1. Fork upload articles shall be adjusted two forks spacing, so that the two forks load balancing, not skewed, items should be abutting side rack gear. 2. Prohibition of single fork job or top with a fork thing, pull things. Special circumstances pull things must establish safety warning signs to remind pedestrians around. 3. items during loading and unloading process, you must brake the truck with the brake. The speed should be slow and steady, do not pay attention to the wheels rolling skids items, in order to avoid rolling objects Bengqi wounding. 5. When goods cross on goods, forks should be as deep as possible into the fork under load, but also pay attention to the fork or sharp objects can not touch other goods. After the minimum should be to stabilize the mast tilting load after load so as not to slide backwards. When lowering the load allows a small amount of mast forward, in order to place the load and extract forks. 6. prohibit speed fork and take the goods to hard objects colliding head with a fork. 7. diesel forklift operation thereof is prohibited personnel standing around the fork to avoid collapse of the goods wounding. 8. prohibit overloading, prohibit the use of fork lift personnel engaged in high places, in order to avoid an accident by falling. 9. allowed inertia brake slip, drop, round or easy to scroll items. 10. Not allowed to use the fork to pick, turn, unloading pallets methods.
(Six) 1. Never leave the truck when the truck left dangling items on the fork, leave the goods must be removed or lowered before the fork truck frame. 2. Pull the parking brake handle dead or depressed handbrake switch. 3. The engine stalled, power outages. (Except in special circumstances, such as the driver's line of sight is not out of the vehicle and no more than 1 minute). 4. Remove the key. Before (seven) Note 1. Stop the engine stalled, the engine should be idling 2. 2-3 minutes after flameout. After stopping the engine flameout, should tighten the brake handle. 3. low season (below zero), the cooling water should be exhausted, or join antifreeze. 4. When the temperature is below -15 degrees, the battery should be removed and moved indoors to avoid cracking. 1-2 turn the handle to rotate the oil filter, check the bolts, nuts without loose phenomenon, and timely exclude normal. 5. truck wash wipe clean routine after routine maintenance, parking garage or designated locations.
(Viii) the accident as an accident, you should do: 1. tight volts to operate the steering wheel or handle, and grasp the steering wheel or the operating handle. 2. dump truck body against the opposite direction. 3. Note the head or chest to prevent injury, do not bump the truck overturned.